Hydraulic Cylinder Components, Machined to Your Drawing
Precision Forgings & CNC Machined Parts for Hydraulic Cylinder OEMs & Rebuilders. Established 2003.
20,000m²
Production area
310+
Precision machines & test equipment
210
Employees
20+
Years industry experience
Hot-sale Products
Hydraulic Cylinder Components
Pistons & Gland
Forged & Machining
Valve Blocks
Rod-end Bearing
TWO PRODUCT LINES, ONE MACHINE SHOP
We make two families of parts, on the same machines
Both lines are turning, deep-hole boring, honing, grinding and welding work held to tight bores and hardened surfaces. That shared process base is the reason we run them together rather than as two unrelated catalogues.
LINE 02
Hydraulic Breaker Replacement Parts
Machined replacement parts to fit hydraulic breakers: pistons, front heads, cylinders, back heads, tool bushings, wear plates and retainer pins. Supplied to independent parts specialists, attachment dealers and repair shops, private label available.
— Cross-reference searchable by brand,model and tool diameter
— Alloy steel, hardness and case depth stated per part
— Independent manufacturer, not an OEM reseller
— Private-label packaging and marking on request
LINE 01
Hydraulic Cylinder Components
Honed tube,hard chrome plated and induction hardened piston rods,pistons, glands, clevises and welded cylinder assemblies. Drawing-based, repeat-order supply to cylinder manufacturers, mobile equipment OEMs and hydraulic repair shops.
— Honed and skived roller-burnished tube
— Hard chrome plated rod,optional nickel underlayer
— Machined pistons,glands and end caps
— Welded tube-to-head and rod-to-eye assemblies
CAPABILITIES
What we can actually make
Process pages sit at the same level as product pages, because the process list is the evidence that a supplier owns machines rather than a catalogue.
CNC Turning Milling
Turning centres, machining centres and vertical lathes for bodies, glands, pistons and mounts.
Deep-Hole Boring Honing
Boring, skiving and roller burnishing, single-pass and stroke honing of cylinder bores.
Grinding Superfinishing
Cylindrical and centreless grinding, polishing and superfinishing of rod and pin surfaces.
Hard Chrome Plating
Hard chrome on rods and pins,optional nickel underlayer for higher salt-spray performance.
Welding
MIG MAG and submerged-arc welding of tube-to-head, rod-to-eye and mount assemblies.
Heat Treatment
Induction hardening, quench and temper, stress relief. Case depth and hardness recorded per batch.
HOW WE WORK
Drawing in, first article out, then repeat supply
Almost all of our work is drawing-based, repeat-order component supply. That means the first order is slow and deliberate, and every order after it is routine.
- You send a drawing. PDF, STEP, IGES, DWG or a dimensioned photograph of a worn part. Tell us the annual quantity, it changes the tooling decision.
- We review manufacturability and come back with questions on tolerance stack, surface finish, material substitution and test certificate requirements.
- Quotation within 48 hours of a complete drawing package, with the material grade and the process route stated, not just a price.
- First article with a dimensional report before series release. We keep the measurement record for the life of the part number.
- Series supply against a rolling forecast or a call-off schedule.
What we do not do. We do not sell from a stock catalogue and we do not resell other factories’ parts under our name. If a part is outside our process range we will say so and, where useful, name the process it needs.
WHO WE SUPPLY
Industries served
Construction Equipment
Excavator, loader and dozer cylinder components; breaker replacement parts for the demolition attachment chain.
Agricultural Machinery
Tie-rod and welded cylinder parts, chrome rod and tube in agricultural service lengths.
Material Handling
Telehandler, forklift and crane cylinder components, mast and outrigger parts.
Mining & Quarrying
Heavy-section machined parts and hard-wearing surfaces for high-cycle applications.
QUALITY
Quality you can verify, not just read about
Certificates are only useful if the buyer can check them. Our quality page lists the certificate number, the issuing body and the expiry date for every certification we hold, and the make and model of every gauge we inspect with.
Quality management: ISO 9001 2015
Retention of records: 10 years
Material certificates: EN 10204 3.1 per shipment
First article inspection: Dimensional report per part number
ABOUT
ORise Machinery has been machining hydraulic components since 2003
We are not a trading office with a catalogue: every tube we hone, every rod we grind and every piston we turn is produced on our own machines, by our own operators, against your drawing and your tolerance stack.
Our plant runs 310 machine tools across turning, milling, deep-hole boring, honing, cylindrical and centreless grinding, and welding. Typical work is drawing-based, repeat-order component supply for hydraulic cylinder manufacturers, mobile equipment OEMs and hydraulic repair shops.
Send a drawing, get a manufacturable answer
Quotation within 48 hours of a complete drawing package. Tell us the annual quantity, it changes the tooling decision and usually the price.