Inspection Equipment
Make, model, measuring range and calibration interval for every gauge. Photographs of the equipment in use, not stock imagery.
| EQUIPMENT | MAKE AND MODEL | MEASURING RANGE | CALIBRATION INTERVAL AND BODY |
|---|---|---|---|
| Coordinate measuring machine | Bridge type CMM | 800 × 1000 × 600 mm | 12 months, external accredited laboratory |
| Surface roughness tester | Portable stylus roughness tester | Ra 0.02 to 10 µm | 12 months, external accredited laboratory |
| Contour and profile measurement | Profile projector | Ø300 mm stage | 12 months, external accredited laboratory |
| Hardness tester, Rockwell | Bench Rockwell tester | HRA / HRB / HRC full scale | 12 months, verified daily against test blocks |
| Micro-hardness tester for case depth | Vickers micro-hardness tester | HV0.01 to HV1 | 12 months, external accredited laboratory |
| Optical emission spectrometer | Bench spark spectrometer | C, Si, Mn, P, S, Cr, Mo, Ni, V on iron base | Verified per shift against certified reference samples |
| Coating thickness gauge | Magnetic induction and eddy current gauge | 0 to 1250 µm | 12 months, external accredited laboratory |
| Magnetic particle inspection | Bench magnetic particle bank | Parts up to 1500 mm long | Daily performance check with a reference block |
| Ultrasonic flaw detector | Digital ultrasonic flaw detector | 0 to 5000 mm steel | 12 months, external accredited laboratory |
| Hydrostatic test bench | Hydraulic pressure test bench | 0 to 40 MPa | Gauge calibration 12 months |
| Bore gauges and setting rings | Two-point and three-point bore gauges | Ø6 to Ø500 mm | Setting rings calibrated 12 months |
| Length standards | Gauge blocks, micrometers, height gauge | 0 to 1000 mm | 12 months, external accredited laboratory |
| Roundness / cylindricity tester | sent to an accredited laboratory | — | Report issued by the laboratory per job |
| Salt spray cabinet | plating batches tested at an accredited laboratory | — | Report issued by the laboratory per test |
Auditing us remotely?
We can film specific machines and gauges on request and send the footage within two working days.